Linking The System (Link) - Sony HT-CT370 Operating Instructions Manual

Linking the system (LINK)

 (return)/
  (select)/
 (proceed)/
(enter)
AMP MENU
On/standby lamp
HT-CT370
LINK button
12
GB
On/standby lamp
HT-CT770
LINK button
Set up the wireless subwoofer connection again.
1
Press the AMP MENU button on the remote control.
2
Select "WS" with the   (select) button then press the
(enter) or  (proceed) button.
3
Select "LINK" with the   (select) button then press the
(enter) or  (proceed) button.
4
When "START" appears on the display of the Bar Speaker,
press the (enter) button.
"SEARCH" appears, and the Bar Speaker searches for equipment
that can be used with Link. Proceed to the next step within 1
minute.
To quit the Link function during a search for equipment, press
the  (return) button.
5
Press the LINK button on the subwoofer with the point of a
pen, etc.
The on/standby lamp on the subwoofer lights in green. "OK"
appears on the display of the Bar Speaker.
If "FAILED" appears, check to ensure the subwoofer is turned on
and perform the process again from step 1.
6
Press the AMP MENU button.
The amplifier menu turns off.