Speedometer Calibration; Quick Cal Calibration; Cal 1 Speedometer Calibration - Mercury 90-895201 204 Operation Manual

SPEEDOMETER CALIBRATION

Quick Cal Calibration

Quick Cal – This calibration is for setting lighting and contrast.
1. Press in the
to Quick Cal screen.
MODE
2. Press

CAL 1 Speedometer Calibration

Cal 1 – This calibration lets you turn on and off the system screens.
NOTE:Screens may vary depending upon the version of the gauge.
1. Press in the
mately 7 seconds until you see the Cal 1 screen.
MODE
2. Press
REMOTE LCD LIGHT?
[NO]
REMOTE LCD CONTRAST?
[NO]
[NO]
TIME FORMAT
[DOWN]
MODE and
to advance through the calibration selections.
MODE
and
to advance through the calibration selections.
[SAVE]
[SAVE]
TIME
[SKIP]
[SAVE]
TROLL buttons for up to 2 seconds to get
+
TROLL
buttons and hold for approxi-
+
Enables you to set the lighting levels
on all the SC1000 simultaneously from
this gauge.
[YES]
Enables you to control the contrast
from another System TACH/Speed
simultaneously from this gauge.
[YES]
Allows you to set the time. You must se-
lect edit to format the time. If a GPS is
connected to the system you cannot
[EDIT] edit time using this function.
Choose between a 12 hour and 24 hour
format. The 12 hour format displays the
date as month-day-year. The 24 hour
format displays the date as day-month-
[UP]
year.
27
(continued on next page)