Tachometer Calibration; Quick Cal Calibration; Cal 1 Tachometer Calibration - Mercury 90-895201 204 Operation Manual

TACHOMETER CALIBRATION

Quick Cal Calibration

Quick Cal – This calibration is for setting lighting and contrast.
1. Press in the
to Quick Cal screen.
MODE
2. Press

CAL 1 Tachometer Calibration

Cal 1 – This calibration lets you turn on and off the system screens.
NOTE:Screens may vary depending upon the version of the gauge.
1. Press in the
mately 7 seconds until you see the Cal 1 screen.
MODE
2. Press
REMOTE SCREENS?
[NO]
REMOTE LCD LIGHT?
[NO]
REMOTE LCD CONTRAST?
[NO]
TRIM POPUP?
[NO]
MODE
and
to advance through the calibration selections.
MODE
and
to advance through the calibration selections.
[SAVE] [YES]
[SAVE]
[YES]
[YES]
[SAVE]
[SAVE] [YES]
TROLL
buttons for up to 2 seconds to get
+
TROLL
buttons and hold for approxi-
+
If yes is selected, then screen changes
made on this SC1000 tach will effect
any other SC1000 tach in the system.
NOTE: All tachs will need to have this screen
turned to "Yes" for this function to work.
If yes is selected, then lighting levels
made on this SC1000 tach will effect
any other SC1000 tach in the system.
NOTE: All tachs will need to have this screen
turned to "Yes" for this function to work.
If yes is selected, then contrast levels
made on this SC1000 tach will effect
any other SC1000 tach in the system.
NOTE: All tachs will need to have this screen
turned to "Yes" for this function to work.
Do you want power trim display screen
to pop up momentarily when you trim
the engine?
(continued on next page)
18