Lexus CT 200H 2016 Owner's Manual page 206

206
4-5. Using the driving support systems
Setting up intuitive parking assist (vehicles with a Lexus Display Audio
or navigation system)
You can change the buzzer sounds volume and the screen operating conditions.
Lexus Display Audio system

Press the "MENU" button on the Lexus Display Audio controller, and then
1
select "Setup" on the screen.
Select "Vehicle", and then select "LEXUS Park Assist" on the screen.
2
Select the desired item.
3
Navigation system

Press the "MENU" button on the Remote Touch, and then select "Setup" on
1
the screen.
Select "Vehicle", and then select "LEXUS Park Assist Settings" on the screen.
2
Select the desired item.
3
Lexus Display Audio screen

The buzzer sounds volume can be adjusted.
1
On or off can be selected for intuitive parking assist display.
2
Rear center sensor display and tone indication can be set.
3
The intuitive parking assist can be operated when
■
Front corner sensors:
●
• The power switch is in ON mode.
• The shift position is in other than P.
• The vehicle speed is less than about 6 mph (10 km/h).
(At any speed when the shift position is in R)
Rear corner and rear center sensors:
●
• The power switch is in ON mode.
• The shift position is in R.
CT200h_OM_OM76197U_(U)
Navigation system screen
