Troubleshooting - Morphy Richards ELIPTA User Manual

CM47150MUK rev3_Layout 1 02/09/2011 14:12 Page 7

Troubleshooting

Problem
• Water is dispensing from the
Steam Wand
• The coffee temperature is too
cold
• The coffee grinds are wet after
use
• Espresso is weak
• Milk is not frothing
• Coffee is too strong or weak
Reason
• Steam Control is open
• Heater block is not hot enough
before dispensing
• Coffee is not compact enough
• Wrong coffee type
• Air and steam are not getting
into the milk
• Wrong volume of coffee
Solution
• Rotate the Steam Control so
its closed
• Before dispensing Coffee, make
sure the Temperature Indicator
(6)
Light has switched off.
• Tamp the coffee before
inserting
• Always use espresso coffee
grinds
• Use a pin to clean the Steam
Wand nozzle and air holes in
the cleaner
• Use the correct amount:
1 person - 7g (1-level Tamping
Spoon)
2 person 14g (2-level Tamping
Spoon)
7