Care And Cleaning - Morphy Richards ELIPTA User Manual

CM47150MUK rev3_Layout 1 02/09/2011 14:12 Page 6
Using the correct type of
coffee grinds
When making espresso coffee it is important to
use the correct type of coffee grinds. Espresso
coffee is a very fine grind which is designed to
work with espresso filters. Using other types of
coffee in an espresso filter (such as filter coffee
grinds,) will result in a poorer tasting coffee and
could clog the filter.
E.S.E. Pods
The coffee maker is compatible with both E.S.E.
pods (a compact coffee pod with a paper filter
covering,) as well as ground espresso coffee.
When making espresso with an E.S.E. pod, use
the One Cup/ E.S.E Pod Filter (12).

Care and cleaning

Disconnect the appliance from the mains supply.
1
Make sure the appliance has completely cooled
2
down.
Simply wipe the Steam Wand
3
a clean, damp cloth.
Do not use any abrasives or metal scourers as this
will damage the finish on the unit.
The Filter Holder (14)
4
washed after each use by rinsing them under
water. To assist in keeping the Filter Holder clean
we recommend you periodically run the machine
with the Filter Holder in place, without coffee,
using water only.
Should the holes in the filter become blocked with
coffee grinds, use a fine bristled brush to help
clean.
When your coffee maker is not being used, we
recommend that you do not leave the filter holder
attached to the machine as this will reduce the life
of the gasket.
Remove the Drip Tray Grid and Drip Tray
5
the appliance and remove any spilt coffee and
water then clean them with a damp cloth or a
damp sponge.
You must clean the Steam Wand and cover
6
immediately after each use, after it has cooled
down. Briefly use the steam setting to clear any
remaining milk out of the Wand and Cover.
Remove the Steam Wand Cover, place under
warm running water to remove excess milk. If the
Steam Wand becomes blocked, use a small pin to
clean more thoroughly.
6
(3) and exterior with
and Water Tank (5) should be
(10) from
WARNING: Steam from the Steam Wand is
extremely hot and can scald.
IMPORTANT: Never wash your coffee machine
accessories in a dishwasher.
Descaling
Disconnect the appliance from the mains supply.
1
Make sure the appliance has cooled down
2
completely.
Remove the Water Tank (5)
3
the machine.
Fill the Water Tank with dissolved citric acid
4
solution, up to the max level marked on the side
of the tank.
Re-fit the Water Tank and Drip Tray to the machine.
5
Place an empty container under the Brewing
6
Head (4) to gather the descaled hot boiled water.
Connect the appliance to the mains supply.
7
Slide the On/Off Switch (9)
8
Temperature Indicator Light
Turn the Control Knob (2)
9
Water will flow through the unit.
Turn the Control Knob back to the off position.
10
Repeat the process with cold water only to flush
11
the system.
Contact us
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from.
Please have the product name, model number
and serial number to hand when you call to help
us deal with your enquiry quicker.
UK Helpline: 0844 871 0960
IRE Helpline: 1800 409 119
Spares: 0844 873 0726
Talk To Us
If you have any questions or comments, or want
some great tips or recipe ideas to help you get the
most out of your products, join us online:
Blog: www.homeofthehouseproud.com
Facebook: www.facebook.com/morphyrichardsuk
Twitter: www.twitter.com/loveyourmorphy
Website: www.morphyrichards.com
and Drip Tray (10) from
and wait for the
(6) to turn off.
to the coffee position.