Operating The Product - Sharper Image T.E.N.S. Massager with Remote Control Operating Manual

Operating the product

To begin
1. Install 4 AAA batteries into the device. Match the positive electrode and
negative electrode in the right direction;
2. Connect 1 pair of electrode wire into the upper left hole of the device and
another pair of electrode wire in the upper right hole.
3. Attach the electrode pads (connecting to the electrode wire) to the treatment area,
such as shoulder.
4. Turn the power/intensity switch knob to 1. The screen should be bright with blue
light. This means the device is ready to begin treatment.
5. Press one of the function keys to start treatment, such as Shoulder or Mode1.
6. Rotate the Switch Knob to adjust the intensity.
7. Press TIMER to adjust the time.
Note: Start from the lowest speed and intensity, and then gradually adjust to a
comfortable level on a scale level from 1 to 10.
.
7