(2) that the device is not effective for pain of central origin, including headache;
(3) that the device is not a substitute for pain medications and other pain management
therapies;
(4) that the device has no curative value;
(5) that the device is a symptomatic treatment and, as such, suppresses the sensation of
pain that would otherwise serve as a protective mechanism;
(6) that the long-term effects of electrical stimulation are unknown;
(7) that the user may experience skin irritation, burns or hypersensitivity due to the
electrical stimulation or electrical conductive medium (gel);
(8) if the user has suspected or diagnosed epilepsy, the user should follow precautions
recommended by his or her physician;
(9) to use caution if the user has a tendency to bleed internally, such as following an
injury or fracture;
(10) use caution if stimulation is applied over the menstruating uterus;
(11) use caution if stimulation is applied over areas of skin that lack normal sensation;
(12) stop using the device if the device does not provide pain relief; and,
(13) use this device only with the leads, electrodes, and accessories that the
manufacturer recommends.
Medical Electrical Equipment needs special precautions regarding electromagnetic
compatibility (EMC) and needs to be installed and put into service according to the
EMC information provided. Portable and mobile radio frequency (RF) communication
equipment can affect Medical Electrical Equipment.
Environmental condition for transport and storage
Easily fragile product
Keep the product in the dry place away from water and rain.
Keep the product in the dry place away from water and rain.
Keep the product in the dry place away from water and rain.
Product package should be recycled.
Product package should be recycled.
Product package should be recycled.
Stacked up 4 cartons at most
Temperature range: 0
Humidity: 10% to 85%
Atmospheric pressure: 400hPa to 1060hPa
.
.
.
o
o
c to 48
c
5
Need help?
Do you have a question about the T.E.N.S. Massager with Remote Control and is the answer not in the manual?