Playing A Tape; Tape - Recording; Recording Your Favorite Cd Tracks On A Tape; Cd-Tape Synchro Recording - Sony CMT-HP8V Operating Instructions Manual

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press TAPE A/B (or FUNCTION on the
unit repeatedly) until "TAPE" appears.
3
Press PLAY MODE repeatedly to select
"g" to play one side, "h" to play
both sides, or "j"* to play both sides
repeatedly.
* The tape automatically stops after playing back
five times.
4
Press N (or TAPE nN on the unit).
The tape starts playing.
Press N (or TAPE nN on the unit)
again to play the reverse side.
Other operations
To
Stop play
Pause
Fast-forward or
rewind
Remove a tape
Finding a point in a track (Cue
and Review)
To go forward
Press > during playback, then press N (or
TAPE nN on the unit) at the desired point.
To go back
Press . during playback, then press N (or
TAPE nN on the unit) at the desired point.
GB
18
Do this
Press x.
Press X. Press again to resume
play.
Press m/M.
Slide the lid open with your hand.
Tape – Recording
Recording your favorite
CD tracks on a tape

— CD-TAPE Synchro Recording

You can record a whole CD on a tape.
You can use TYPE I (normal) tape. The
recording level is ajusted automatically.
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Press FUNCTION repeatedly (or TAPE
A/B on the remote) until "TAPE"
appears.
3
Press PLAY MODE repeatedly to select
"g" to record on one side or "h" to
record on both sides.
4
Press FUNCTION repeatedly (or CD on
the remote) until "CD" appears.
5
Load a disc you want to record.
6
Press CD SYNC.
The tape deck stands by for recording and
the CD player pauses for playback.
"REC" flashes.
When you want to record on the reverse
side, press TAPE nN (or N on the
remote).
7
Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 5 and 6,
perform steps 2 to 6 of "Creating your own
program" (page 13).
Tip
When setting the PBC function to on, change the
setting to off and then start recording.