Timer; Falling Asleep To Music; Sleep Timer; Waking Up To Music - Sony CMT-HP8V Operating Instructions Manual

Timer

Falling asleep to music

— Sleep Timer

You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Use buttons on the remote for the operation.
Press SLEEP repeatedly.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90MIN t 80MIN t 70MIN t
... t 10MIN t OFF
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing.
Other operations
To
Check the
remaining time**
Change the time
to turn off
Cancel the Sleep
Timer function
** You cannot check the remaining time if you select
"AUTO".
Note
Do not set to "AUTO" during Synchro Recording on a
tape.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
GB
22
Press
SLEEP once.
SLEEP repeatedly to select the
time you want.
SLEEP repeatedly until "OFF"
appears.

Waking up to music

— Daily Timer

You can wake up to music at a preset time. Make
sure you have set the clock (see "Setting the
clock" on page 8).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see "Creating
your own program" on page 13).
• TAPE: Load a tape.
• TUNER: Tune in a radio station (see
"Listening to the radio" on page 16).
2
Adjust the volume.
3
Press CLOCK/TIMER SET until "DAILY
SET" appears.
4
Press ENTER.
"ON" appears and the hour indication
flashes.
5
Set the time to start playing.
Press M/m repeatedly to set the hour, then
press , .
The minute indication flashes.
Press M/m repeatedly to set the minute,
then press ENTER.
6
Set the time to stop playing following
the same procedure as step 5.
7
M/m
Press repeatedly until the desired
sound source appears.
Each time you press the button, the display
changes cyclically as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8
Press ENTER.
The type of timer ("DAILY"), the start
time, the stop time, and the sound source
appear in turn, before the original display
returns.
9
Press ?/1 to turn off the system.