Table of Contents
Advertisement
BIOS Hotkey Pressed [Disabled]
This item become configurable only when the previous item is set to [Enabled] and allows
you to enable or disable this function. Configuration options: [Enabled] [Disabled]
Un-Configure ME [Disabled]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or set it to
[Enabled] to use a password. Configuration options: [Enabled] [Disabled]
2.6.6
USB Configuration
The items in this menu allow you to change the USB‑related features.
The USB Devices item shows the auto‑detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Intel
xHCI Mode [Smart Auto]
®
[Auto]
[Smart Auto]
[Enabled]
[Disabled]
EHCI Hand-off [Disabled]
[Enabled]
[Disabled]
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.2.3 Motherboard layout for the location of the USB ports.
2.6.7
Platform Misc Configuration
The items in this menu allow you to configure the Platform Misc.
PCI Express Native Power Management [Disabled]
Allows you to enable or disable PCIE express native power management. Configuration
options: [Enabled] [Disabled]
2-24
Enables the support for USB devices on legacy operating systems (OS).
The USB devices can be used only for the BIOS setup program.
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Keeps the last operation of xHCI controller in OS during bootup.
Enables the operation of xHCI controller.
Enables the function.
Disables the function.
Enables the support for operating systems without an EHCI hand‑off
feature.
Disables the function.
Chapter 2: Getting started
Hide quick links:
Advertisement
Table of Contents
