Page 1
Skywalker X-8 Installation Manual Thank you for Purchasing the Sky- walker X-8 Plane. The skywalker X-8 is designed for First-Person-Vision(FPV) application specifically. Technical parameters Wingspan:2120mm weight:880G motor:2820 KV730 speed regulator:60A Servo:17G battery pack:4S8000MAH propeller: 12X6~13X8 Take-off weight :3200G 1...
Page 2
KIT version configuration:Fuselage, wing, wing connection plastic parts , tube, accessories bag, sticker Parts List 2...
Page 3
NOTES: Foam Glue is needed for installation 1. Cut the extension cable slot in the fuselage before gluing as the photo shows. ( Slot width: 5mm, depth: 3mm) 3...
Page 4
2、Glue the fuselage together. And then glue the plywood according to the photos before. 4...
Page 5
1. Install the fuselage connection plastic parts accordingly (L and R). Notes: Insert the 2pcs carbon tube to the fuselage 5...
Page 6
for positioning before glue the plastic parts. 2. Fuselage assembly. Glue the plastic parts to the wing separately. Then install the servos, servo horns and push rods. 6...
Page 11
6. CG Position: 440mm(±5mm) to the nose. 11...
Page 12
3200 g, if exceed the limit, please strengthen wings. Thank you again for choosing skywalker series products. If there are technical problems or suggestions, please email us for consultation. Or consult your local dealer.
Need help?
Do you have a question about the X-8 and is the answer not in the manual?
Questions and answers