LG Flatron 774FT Service Manual page 7

SIZE
SIZE
49
Vertical Size
To adjust the image height.
Horizontal Size
To adjust the image width.
SHAPE
Tilt
To correct the image rotation.
Side Pincushion
To correct bowing in or out of the image.
Side Pincushion Balance
To correct the balance of both sides bowling.
Parallelogram
To correct the geometric distortion.
Trapezoid
To correct the geometric distortion.
Corner Top
To correct the irregular distortion of the
displayed image.
Corner Bottom
To correct the irregular distortion of the
displayed image.
SETUP
64
Video Level
To select voltage level of the video card output - It is
input level of the monitor. Most video cards are 0.7V.
Language
To choose the language in which the control names are
displayed. OSD Menus are available in five languages.
OSD TIME
This item lets you adjust the OSD display time
SPECIAL
Degaussing
Used to demagnetize the picture to give a more accurate
image and color.
Recall
You can use this function to reload the modified parameters
for screen display operation,as specified by the user after
purhased;Position, Size, Side Pincushion,Side Pincushion
Balance, Parallelogram,Trapezoid (These recalled options
may differ depending on the mode selected:Preset, User, or
New).
If you don't want to recall the monitor to these modified
settings, use the (
press the SELECT (or SET) button.
RESET
Return to all factory default settings except "LANGUAGE":
Brightness, Contrast, Tilt,Color 9300K, Video Level, OSD
Time,Moire (These reset options may differ depending on the
mode selected: Preset,User, or New).
If you don't want to reset the monitor, use the (
) button to select CANCEL and then press the
SELECT (or SET) button.
Moire
This item allows you to reduce the moire (Moire is caused by
interference Horizontal Scan Line with the periodical dot
screen), It is normally OFF (H:0/V:0)
The moire adjustments may affect the focus of the screen..
Moire adjustments may shake slightly while the moire
reduction function is on.
Purity
Use to adjust the overall purity of the image if the appears
uneven.
- 7 -
.
) button to select CANCEL and then