LG Flatron 774FT Service Manual page 6

On-Screen-Display (OSD) Control
To adjust an image size, position, and operating
parameters are quick and easy with the On-Screen-
Display control system, using the OSD button and the
Adjustment control button. A quick example is given below
to familiarize you with use of the controls.
OSD
OSD
SET
Example;
Note: (Monitor and PC's power switch should be ON,
with an image or prompt on the screen).
1. Press the OSD Button, then the Main menu of the
OSD appears. Display will look like as below:
BRIGHTNESS CONTRAST
2. To access a control, use the
When the icon you want becomes highlighted, Press
the OSD SET Button.
3. Use the
desired level.
BRIGHTNESS CONTRAST
4. Accept the changes by pressing the SET button.
5. Exit the OSD by pressing the OSD Button.
SET
100
100
or Buttons.
Buttons to adjust the item to the
100
100
Listed below are icons, icon names, and icon descriptions
of the OSD menu.
BRIGHTNESS
BRIGHTNESS CONTRAST
Birghtness
To adjust the screen brightness level.
Contrast
To adjust the image contrast level.
COLOR
PRESET
TEMP
RED
GREEN
BLUE
6500K 9300K
To appear the display's color temperature.
• 6500K : Slightly reddish white
• 9300K : Slightly Bluish white
TEMP
User easily color set without adjustment Red,
Green, Blue (R/ G/ B).
RED To set your own color levels.
GREEN To set your own color levels.
BLUE To set your own color levels.
POSITION
POSITION
Vertical Position
To move the image up or down.
Horizontal Position
To move the image left or right.
- 6 -
CONTRAST
100
100
COLOR
6500K 9300K
66
45