LG Flatron 774FT Service Manual page 12

Hide thumbs Also See for Flatron 774FT:
Table of Contents

Advertisement

White Balance Meter with PC arrow keys.
17-2)Display color 15,0 window pattern (70x70mm) at
mode 4.
18) Adjust SUB-CONTRAST command to 50
19) Display color 15,0 full white patten at Mode 4.
20) Set Brightness and Contrast to Max position.
21) COLOR ADJ. → LUMINANCE → ABL command.
± 1FL of the luminance.
22) Adjust ABL to 32
23) After push the ENTER key,and COMMAND→ PRESET
EXIT→Y(Yes) command.
24) Exit the program.
4. Input EDID Data.
1) Display color 15,0 cross hatch pattern at Mode 4.
2) EEPROM Æ Write EDID command and confirm
± 1FL .
"EDID Write OK "message of monitor.
3) Exit from the alignment program.
4) Power switch OFF/ON for EDID data save.
5.Adjustment for Focus.
1) Set the Brighteness and Contrast to max position.
2) Display H character in full screen at MOde 4.
3) Adjust two Focus contro on the FBT that focus
should be the best condition.
- 12 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents