Brewing Coffee Later - Oster BVSTDC4401 Instruction Manual

1 . You must first set the time for when you would like the
coffee maker to begin brewing your coffee as described
in "Setting the Clock and the Delay Brew Timer" section.
2. Prepare your coffee maker as described in the "Adding
Water and Ground Coffee" section.
3. To activate the delay brew function and program your
coffee maker to brew coffee at a later time, press the
select "Selec./Apag." button twice (Figure 7). The delay
brew "Colado Program." light will illuminate. The coffee
maker is now set to automatically brew coffee at the
pre-set time. At this time the brew strength light will turn on. You can select
the strength that you desire by pressing the brew strength "Intensidad"
button.
4. At the pre-set time, the brew now "Colar Ahora" light will turn on and the
delay brew "Colado Program." light will turn off, indicating the brewing has
started in the selected brew strength. The fresh brew timer feature will start.
5. The coffee maker warming plate (model 4401 only) will keep your coffee hot
for 2 hours and then automatically turn off. For model 4402, the unit will turn
off at the end of the brew cycle.
NOTE: Scalding may occur if the lid is open during brewing cycle.
As a safety feature, your coffee maker will NOT start again automatically the
next day. If you want your coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set delay brew, by repeating
Steps 2 and 3 above.
To cancel delay brew:
Press the select "Selec./Apag." button until all lights turn off.

BREWING COFFEE LATER

English-8
Limpiar
Colado
Min
Prog.
Colar
Ahora
Hora
Programar Selec. / Apag.
Fuerte
Regular
Temporizador
de Frescura
Intensidad
figure 7