Pl 8.20 Optional Feeder Pick-Up Assembly - Xerox Phaser 4600 Service Manual

PL 8.20 Optional Feeder Pick-up
Assembly
Item Part Description
1 – Feed roll frame (P/O PL 8.20 Item
17)
2 130N01628 Tray 3 no paper sensor (Q07-310),
Tray 4 no paper sensor (Q07-410),
Tray 5 no paper sensor (Q07-501),
Tray 6 (Q07-610) (REP 7.35)/Tray
3 level sensor (Q07-350), Tray 4
level sensor (Q07-450), Tray 5 level
sensor (Q07-550), Tray 6 Level
sensor (Q07-650) (REP 7.37) (see
NOTE 2)
3 – No paper sensor actuator (P/O PL
8.20 Item 17) (REP 7.36)
4 022N02232 Feed roller
5 – Idle gear (P/O PL 8.20 Item 17)
6 – One way gear (P/O PL 8.20 Item
17)
7 – Bearing (P/O PL 8.20 Item 17)
8 – Feed roll shaft (P/O PL 8.20 Item
17)
9 – Static eliminator (P/O PL 8.20 Item
17)
10 – Ground strip (P/O PL 8.20 Item 17)
11 – Feed joint gear (P/O PL 8.20 Item
17)
12 – Idle gear (P/O PL 8.20 Item 17)
13 – Not used
14 – Housing (P/O PL 8.20 Item 17)
15 – Tray up limit switch (P/O PL 8.20
Item 17) (see NOTE 2)
16 – Bearing (P/O PL 8.20 Item 17)
17 – Feed assembly
NOTE: 1. Order the entire 520-Sheet Feeder using Service
part number 050K74180 or Sales part number 097N01874.
NOTE: 2. The component control codes are dependent on
the machine configuration.
5 Parts List
PL 8.20
02/2014
5-20
Revised
Phaser 4600/4620/4622 Printer Service Manual