Direct frequency input
Select desired waveband.
Press * button.
Enter desired frequency with buttons
1 to R.
i
You can only enter frequencies within
the respective waveband.
If a button is not pressed within
four seconds, the radio will return to
the last station tuned.
Manual tuning
Select desired waveband.
Press S or T button for approx-
imately three seconds.
Press button repeatedly until desired
frequency has been reached.
Step-by-step station tuning takes place
in ascending or descending order. Each
time the button is pressed, the radio
tunes further by 0.2 MHz. During man-
ual tuning, the radio is muted.
Automatic seek tuning
Select desired waveband.
Press S or T button briefly.
The radio will tune to the next highest
or next lowest receivable frequency.
i
If no station is received after two
consecutive scans of the complete
frequency range, then the scan stops
at the frequency from which it began.
Controls in detail
Audio system
Scan search
Starting scan search
Select desired waveband.
Press
SC
soft key.
SC
will appear in the display. The ra-
dio briefly tunes in all receivable
stations on the waveband selected.
Ending scan search
soft key or S or T.
Press
SC
The station last played will be se-
lected and
SC
disappears from the
display.
217