STEP
3
Laws and regulations pertaining to anchors
■
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifications
can be used.
This vehicle is designed to conform to the SAE J1819.
CAUTION
When installing a booster seat
■
To prevent the belt from going into ALR lock mode, do not fully extend the shoulder
belt. ALR mode causes the belt to tighten only. This could cause injury or discom-
fort to the child. (P. 85)
Replace the head restraint and lift
it up to the uppermost lock posi-
tion.
I n f o r ma t i o n P r o v i d e d b y :
1-7. Safety information
149
1