Table of Contents
Advertisement
Practical hints
Replacing bulbs
Front lamps Bi-Xenon*-type
1 Bulb socket for turn signal lamp
2 Housing cover for high beam flasher
lamp
3 Housing cover for Bi-Xenon* lamp
354
4 High beam flasher bulb
5 Parking and standing lamp
Warning!
Do not remove the cover
3
for the Bi-Xe-
non* headlamp. Because of high voltage in
xenon lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
High beam bulb for high beam flasher
Switch off the lights.
Open the hood ( page 281).
Turn housing cover 2 counterclock-
wise and remove.
Turn bulb holder 4 with the bulb coun-
terclockwise and remove.
Press the bulb backwards and turn
counterclockwise out of the bulb hold-
er.
Press the new bulb into the holder and
G
twist it clockwise.
Place the bulb holder back into the
lamp and turn it clockwise.
Place the housing cover 2 back on
and turn them clockwise.
Advertisement
Table of Contents
