Table of Contents
Advertisement
Program mode selector switch
The program mode selector switch is
located on the lower part of the center
console.
1 Program mode selector switch
S Sport
For standard driving
C Comfort
For comfort driving
!
Never change the program mode when
the gear selector lever is out of
position P. This could result in a
change of driving characteristics for
which you may not be prepared.
Press the program mode selector
switch 1 repeatedly until the letter of
the desired shift program appears in
the multifunction display ( page 129).
Select C for comfort driving:
The vehicle starts out in second
gear (both forward and reverse) for
gentler starts. This does not apply if
full throttle is applied or gear
range 1 is selected.
Traction and driving stability are
improved on icy roads.
Upshifts occur earlier even when
you give more gas. The engine then
operates at lower rpms and the
wheels are less likely to spin.
The power transmission ratio for
gear selector lever position R
changes depending on the program
mode selected (S or C).
Controls in detail
Automatic transmission
Accelerator position
Your driving style influences the
transmission's shifting behavior:
Less throttle
Earlier upshifting
More throttle
Later upshifting
Kickdown
Use kickdown when you want maximum
acceleration.
Press the accelerator past the point of
resistance.
The transmission shifts into a lower
gear.
Ease on the accelerator when you have
reached the desired speed.
The transmission shifts up again.
163
Advertisement
Table of Contents
