Advertisement
RADIUS server that you can use). The RADIUS server communicates
with the switch, which performs the quarantining by moving ports or
MAC addresses in and out of virtual local area networks (VLANs).
Ethernet Information
The Ethernet interfaces should be attached as follows:
■
Ethernet Port1
– Connect to the corporate LAN (the internal network
side)
Ethernet Port2
– Connect to a switch, VPN, or DHCP server (the
■
Internet or endpoint side)
Port Information
You might need to configure some firewalls and routers to allow NAC 800 to
access the following ports for testing:
Agentless test method – 137, 138, 139, and 445
■
■
ActiveX and agent-based test method – 1500
License validation and test updates – update.hp.com port 443
■
Software and operating system updates – download.hp.com port 80
■
User Documents
The following user documents are available at www.procurve.com/nactools:
1.
ProCurve Network Access Controller 800 Hardware Installation Guide
– Refer to this document first to see how to prepare for and perform the
physical installation of the appliance and how to establish initial
management access. This document contains appliance specifications,
safety information, and appliance certifications.
2.
ProCurve Network Access Controller 800 Configuration Guide – Refer
to this document second, to understand the product's features,
capabilities, and use. This document explains how to configure the
appliance based on the usage model you choose to deploy in your
network.
Ethernet Information
Quick-start Card-3
Advertisement
