Table of Contents
Advertisement
26) CI (CASE OPEN)
This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if the
system case begin remove.
27) WOL (Wake On LAN)
This connector allows the remote servers to manage this system via your network adapter which
supports WOL. Be careful with the polarity of the WOL connector. Check the pin assignment
carefully while you connect the WOL cable, incorrect connection between the cable and connector
will make the device unable to work or even damage it. For optional WOL cable, please contact
your local dealer.
Pin No.
1
Pin No.
1
- 35 -
Hardware Installation Process
Definition
1
Signal
2
GND
Definition
1
+5V SB
2
GND
3
Signal
Advertisement
Table of Contents
