Table of Contents
Advertisement
14) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn
to another color.
15) RAM_LED
Do not remove memory modules while RAM_LED is on. It might cause short or other unexpected
damages due to the stand by voltage. Remove memory modules only when AC power cord is
disconnected.
1
Pin No.
- 29 -
Hardware Installation Process
Definition
1
MPD+
2
MPD-
3
MPD-
Advertisement
Table of Contents
