Information Button - Mercedes-Benz 2002 M-Class Operator's Manual

Instruments
Operation
and controls
Tele Aid
If the indicator lamp in the Roadside Assistance
button • is illuminated continuously and there was
no voice connection to the Response Center established,
then the Tele Aid system could not initiate an Roadside
Assistance call (e.g. the relevant cellular phone network
is not available). The message "ROADSIDE
ASSISTANCE – CALL FAILED" appears in the MCS
display.
Should this occur, assistance must be summoned by
other means.
Roadside Assistance calls can be terminated using the
END button on the MCS unit.
Instrument
Driving
cluster display
172
Practical hints Car care
Information button ¡
RESE T MOD E
Located in the overhead control panel is the Information
button ¡. Briefly press on cover (3) – the cover will
open.
Pressing and holding the Information button ¡ (for
longer than 2 seconds) will initiate a call to the
Customer Assistance Center. The button will flash while
the call is in progress. The message "INFO –
CONNECTING CALL" appears in the MCS display. When
the connection is established, the message "INFO –
CALL CONNECTED" appears in the MCS display.
Technical
Index
data
3
P82.95-2292-26