Mercedes-Benz 2002 M-Class Operator's Manual page 170

Important!
Always make sure that the indicator lamps in the
"SOS" button, the Roadside Assistance button • and
the Information button ¡ do not remain illuminated
constantly in red and the message "TELE AID – VISIT
WORKSHOP" is not displayed in the MCS display after
the system self check.
If a malfunction is indicated as outlined above, have the
system checked at the nearest Mercedes-Benz Light
Truck Center as soon as possible.
Emergency calls
An emergency call is initiated automatically:
• following an accident in which the Emergency
Tensioning Retractors (ETR's) or airbags deploy,
• if the antitheft alarm or the tow away alarm stays on
for more than 20 seconds, see pages 36 and 37.
An emergency call can also be initiated manually by
opening the cover next to the inside rear view mirror
labeled "SOS", then briefly pressing the button located
under the cover. See below for instructions on initiating
an emergency call manually.
Tele Aid
Instruments
Operation
and controls
167
Instrument
Driving
cluster display
Once the emergency call is in progress, the indicator
lamp in the "SOS" button will begin to flash. The
message "EMERGENCY CALL – CONNECTING CALL"
appears in the MCS display. When the connection is
established, the message "EMERGENCY CALL – CALL
CONNECTED" appears in the MCS display. All
information relevant to the emergency, such as the
location of the vehicle (determined by the GPS satellite
location system), vehicle model, identification number
and color are generated.
A voice connection between the Response Center and
the occupants of the vehicle will be established
automatically soon after the emergency call has been
initiated. When a voice connection is established the
audio system mutes and the message "TELE AID –
EMERGENCY CALL ACTIVE" appears in the MCS
display. The Response Center will attempt to determine
more precisely the nature of the accident provided they
can speak to an occupant of the vehicle.
Practical hints Car care
Technical
Index
data