Advertisement
13
Mounting bracket
Canopy
Lift canopy up, aligning its keyhole slot
with the preassembled screw on
mounting bracket and twist
counterclockwise to lock in place.
Reinstall the screw removed in step 12
and tighten all screws securely.
16
Finial
Remove the finial from fan. Keep it.
© 2013 Monte Carlo Fan Company
14
Install blade bracket with blade by 3
blade screws and washers provided.
Tighten securely. Repeat this process for
remaining blades.
17
Final cap
Install decorative cap and reinstall the
finial removed in step 16.
5
15
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
Finial
9/23/2013
Advertisement
