Table of Contents
Advertisement
• Part – Part: the printer will use both noz-
zles to print parts. You can assign a nozzle to
a part by changing the color in the part list.
• Part – Support: the nozzle that is in part-
mode will print the actual part, the other
nozzle will be in support mode and will print
the support material.
• Contour-Infill: the nozzle that is in contour
mode will print the contours of a layer and
the other nozzle will print the infill.
Start printing
When you are connected you can press
"start printing", the button flips and a turns
in a pause and stop button.
While printing a process bar appears to indi-
cate the printing status. The first 37% of the
bar is indicating the slicing progress, from
that point on the bar moves by the progress
of the print job.
The nozzle temperature will change to the
ones that are set in the g-code. During a
print you can monitor and manually change
the temperature.
The pause button will pause a print job. On
pause the printer will move up for 10 mm
and to X/Y home.
Creating your own printable file: from STL to gcode
19
Advertisement
Table of Contents
