Table of Contents
Advertisement
3.5 Materialise Creatr Workflow
STEP 1: New Project
In the top left corner you can find the 'new project' button. This function will
remove all parts and scenes from the current project and generates a new, empty
project. The user is asked to save the current project (parts and scenes) before
closing. If you want to work in two (or more) parallel Creatr sessions, just open
Creatr a second time.
STEP 2: Click on import part and select
the part you want to add to the
platform.
STEP 3: The part will be added to your
part list
STEP 4: You can select/deselect a part
by clicking on the selection
checkbox in the part list or on
the part on the build platform.
TIP: for successful printing, be
sure to position the print on
a point where the sticker is not
damaged.
TIP: If your stl model has
overhang angles of more than
45 degrees, the printer will not
be able to print it without a
support structure (simply because
the printer cannot lay down layers
of plastic in mid-air). If you want to
learn how to add support structures,
revert to section
14
Creating your own printable file: from STL to gcode
Advertisement
Table of Contents
