Table of Contents
Advertisement
Lay flat
The Bottom/Top function allows easy ori-
entation of the selected part by indicating
a plane as the bottom/top plane. This plane
will automatically be oriented parallel to
the platform (i.e. the XY-plane).
Click the Indicate Plane button to select
you reference plane (the selected plane is
indicated in green). The selected plane will
be orientated parallel to the platform facing
the upper or bottom (depending on your
selection).
Duplicate
This command automatically duplicates the
selected part(s).
You can specify the number of extra parts
you like to create, the spacing between the
duplicated parts and the direction you like
to duplicate in.
3.6
Export to file or print directly
Once you are happy with your part(s) you can generate a file which you can save to your
computer or USB drive. However, you can also directly send the part(s) to the printer
when it's connected to the computer. In the latter case, additional printer control settings
such as temperature, extrusion and calibration are available.
Creating your own printable file: from STL to gcode
16
Advertisement
Table of Contents
