Honda 2001 VT750C3 Owner's Manual page 97

(6)
8. Install the speedosensor and lighten Ihe
screw securely.
F
R
A
M
E
/
w
H
E
E
L
S
/
B
R
A
K
E
S
(7)
(8) Surface
o
o
(6) Lugs
(7)
lndc~
lilll:
If a torque wrench was not used for installalion.
see your authoril.ed Honda dealer a~ soon a.~
possible
10
verify proper assembly. Improper
a~sembly
may lead
10
loss of bmking capacity.
Inslallation:
I. Position the wheel between the fork legs and
insert Ihe fronl axle shaft from the left side.
through the left fork leg and wheel hub.
To avoid damaging the brake pads while
installing the wheel. carefully fit the bmke
disc belween the pads.
2.
Position the lug
(6)
on Ihe speedometer
gearbox against the lefl fork leg.
3.
Align Ihe index line
(7)
of the axle shaft with
Ihe surface
(8)
of fork leg.
4. Tighten the axle pineh bolts on the lefl fork
leg to the specified torque:
22 N·m (2.2 kgf·m, 16Ibf·ft)
;. Tighten the axle bolt to the specified lorque:
59
N·m (6.0 kgl.m ,43Ibf.ft)
). Operate Ihe front brake and pump Ihe fork
several times. Check for free wheel rolation
after the brake is released.
Recheck the wheel if the bmke dr-Igs or the
wheel docs not rotate freely.
7. Tighten the axle pinch bolls on the right fork
leg to specified torque:
22 N·m (2.2 kgl.m • 16Ibf.ft)
89