Broadcast Function - Yamaha MusicCast MCX-C15 Owner's Manual

Notes
• Make sure the server is set to ON or LAN standby
mode when using the ON Timer function to start
playback from a client. For details, see the
MCX-1000 Owner's Manual, page 18.
• You can choose from two different time display
settings (12-hour and 24-hour) on the server. This
setting can be changed as follows:
Press u / d to choose "System Setup" - "Date/
Time" - "Time Display", then choose "24 hours"
or "12 hours (AM/PM)", and press SELECT.
Press u / d / j / i to choose "OK" and press
SELECT.

Broadcast function

You can use this function to enjoy the same song
from different locations around your home.
When the server is set to Broadcast mode, the song
being played back on the server is distributed
simultaneously to all clients set up to receive
Broadcast playback.
Make sure the server is in Broadcast mode before
carrying out the following procedure on your client.
Notes
• One or more clients must be set up on the server
before Broadcast playback will begin.
• Starting Broadcast playback on a client or the
server turns off the OFF Timer and ON Timer
functions. Further, the Timer functions do not
return to their previous state when Broadcast
playback stops. Reset these functions as required.
• You may experience a difference of up to 0.2
seconds in playback synchrony between clients.
To add clients into Broadcast
playback
MCX-3 WD01440
LIBRARY
VOL
MUTE
FAVORITES
1 2
SELECT
1
PLAY
MENU INPUT
INFO.
PAUSE
1 2
STOP
4 5
GROUP PLAY GROUP
7
OFF TIMER ON TIMER
1
Press and hold MENU until the Top
Menu screen is displayed.
HANDY FUNCTIONS
3 4
2-3
BOOKMARK
RANDOM
3
REPEAT
6
RECALL
S
39