ELSA LANCOM Business LC-4X00 Manual page 111

rerouted according to the table using the ELSA LANCAPI. Use the dialed number to verify
whether the LCR settings suit your requirements. For router connections, check the log
file for the number dialed (LANmonitor: View
Time for the selection
It goes without saying that the internal clock of the ELSA LANCOM Business must be set
properly to ensure that the least-cost router correctly applies the information in the table.
The router can also help itself in this respect as well, however: It can synchronize its
internal clock with the time in the ISDN, either when switched on, or during each call
establishment.
In ELSA LANconfig , switch to the 'Date/Time' tab in the 'Management' configuration
section.
Activate the option for automatic synchronization at each call establishment. If you
would rather enter the time manually, disable this option.
The current time is lost when the unit is switched off. Enter the number of a random
remote station if you would like the device to establish a connection immediately
upon being switched on, in order to synchronize the time with that of the ISDN
network. Specify whether the remote station is digital (e.g. BBSs or Internet
providers) or analog (telephone message or voice services).
Please check the time after the first connection. Some PBXs may transfer incorrect times
to the router, which would impair the function of the least-cost router!
Operating modes and functions
Options Protocol
ELSA LANCOM Business
101
Display).