ELSA LANCOM Business LC-4X00 Manual page 105

Activate the LANCAPI server, or set it to permit outgoing calls only. In the latter
case, the LANCAPI will not respond to incoming calls—to receive faxes, for
example. Permitting outgoing calls only is useful if you do not have a specific call
number available for the LANCAPI .
When the LANCAPI server is activated, enter the call numbers to which the
LANCAPI should respond in the 'Number' field. You can enter several call numbers
separated by semicolons. If you do not enter a call number here, all incoming calls
are reported to LANCAPI .
LANCAPI is preset to use port '75' (any private telephony service). Do not change
this setting unless this port is already in use by a different service in your LAN.
If you do not wish all the computers in the local network to be able to access the
LANCAPI functions, you can define all the authorized users (by means of their IP
addresses) by entering them in the access list.
If you enter more than one call number for LANCAPI, you can, for example, provide each
individual workstation with a personal fax machine or personal answering machine.
Proceed as follows: When installing communications programs such as ELSA-RVS-COM
on the different workstations, specify the various call numbers to which the program
should respond.
Switch to the 'Availability' tab. Here you can determine how the ELSA LANCOM
Business should respond if a connection is to be established via the LANCAPI (incoming
Operating modes and functions
ELSA LANCOM Business
95