Chord SPM 600 User Manual page 32

power amplifiers technical information
output power
dynamic headroom
frequency response
(8 ohms)
frequency response
(4 ohms)
signal to noise ratio
channel separation
pre-amplifier
input connections
input impedence
input capacitance
output impedence
output inductance
output connections
slew rate
gain
stability
dimensions
weight
SPM 603
1 x 200W rms per channel
@ 0.03% distortion into 8Ω
2 x 130W rms per channel
@ 0.03% distortion into 8Ω
1 x 270W rms into 8Ω
2 x 170W rms into 8Ω
-1dB, 0.2Hz to 46KHz
-3dB, 0.1Hz to 77kHz
-1dB, 0.2Hz to 39KHz
-3dB, 0.1Hz to 75kHz
better than -103dB,
'A' weighted two thirds power
better than 95dB
3 x gold-plated custom gold-plated
RCA style phono sockets
100kΩ. Unbalanced or Balanced
<30pf
0.03Ω
2.6µH
6 x 4mm rhodium binding posts
70V per µS, 1kHz
20V square wave
30dB
unconditional
480mm (w) x 335mm (d) x 133mm (h)
10kg
SPM 1203
1 x 330W rms per channel
@ 0.03% distortion into 8Ω
2 x 250W rms per channel
@ 0.03% distortion into 8Ω
1 x 440W rms into 8Ω
2 x 330W rms into 8Ω
-1dB, 0.2Hz to 46KHz
-3dB, 0.1Hz to 77kHz
-1dB, 0.2Hz to 39KHz
-3dB, 0.1Hz to 75kHz
better than -103dB,
'A' weighted two thirds power
better than 95dB
3 x gold-plated custom gold-plated
RCA style phono sockets
100kΩ. Unbalanced or Balanced
<30pf
0.03Ω
2.6µH
6 x 4mm rhodium binding posts
70V per µS, 1kHz
20V square wave
30dB
unconditional
480mm (w) x 335mm (d) x 133mm (h)
14kg
31