Chord SPM 600 User Manual page 29

power amplifiers technical information
output power
dynamic headroom
frequency response
(8 ohms)
frequency response
(4 ohms)
signal to noise ratio
channel separation
pre-amplifier
input connections
input impedence
input capacitance
output impedence
output inductance
output connections
slew rate
gain
stability
dimensions
dimensions
(fitted with integra)
weight
SPM 1200E
350W rms per channel
@ 0.02% into 8Ω
620W rms per channel into 4Ω
750W rms per channel into 2Ω
Thermal limitation only,
1 channel driven
440W rms per channel into 8Ω
780W rms per channel into 4Ω
-1dB, 0.2Hz to 41kHz
-3dB, 0.1Hz to 89kHz
-1dB, 0.2Hz to 41kHz
-3dB, 0.1Hz to 79kHz
better than -103dB,
'A' weighted two thirds power
better than 90dB
2 x gold-plated fully balanced
XLR sockets. 2 x gold-plated
RCA phono sockets, unbalanced
56kΩ. Unbalanced, 112Ω Balanced
<30pf
0.03Ω
2.6µH
8 x WBT binding posts
(2 pairs A, 2 pairs B)
70V per µS, 1kHz
20V square wave
30dB
unconditional
420mm (w) x 355mm (d) x 150mm (h)
480mm (w) x 355mm (d) x 185mm (h)
22kg
(26kg with 4 leg integra)
SPM 1400E
480W rms per channel
@ 0.02% into 8Ω
800W rms per channel into 4Ω
1000W rms per channel into 2Ω
Thermal limitation only,
1 channel driven
550W rms per channel into 8Ω
900W rms per channel into 4Ω
as 1200E
as 1200E
as 1200E
as 1200E
as 1200E
as 1200E
as 1200E
as 1200E
as 1200E
4 x WBT binding posts
(2 pairs A, 2 pairs B)
as 1200E
as 1200E
as 1200E
as 1200E
as 1200E
24kg
(28kg with 4 leg integra)
28