When Installed The Rear Outboard Head Restraints To Opposite Direction; Adjusting The Height Of The Front Seat Head Restraints; Adjusting The Rear Center Seat Head Restraints - Toyota 2011 FJ Cruiser Service Manual

When installed the rear outboard head restraints to opposite direction

n
While pressing in the screwdriver, pull up the head restraint.

Adjusting the height of the front seat head restraints

n

Adjusting the rear center seat head restraints

n
Always raise the head restraint one level from the stowed position when
using.
CAUTION
Head restraint precautions
n
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
l Use the head restraints designed for each respective seat.
Adjust the head restraints to the correct position at all times.
l
After adjusting the head restraints, push down on them and make sure
l
they are locked in position.
Do not drive with the head restraints removed.
l
1-3. Adjustable components (seats, mirrors, steering wheel)
Push a flathead screwdriver into the slot.
The slot is located on the right side of the
right head restraint anchor.
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
I n f o r ma t i o n P r o v i d e d b y :
1
55