Pull Down Menus; Reference Name Screen; Copy Device Screen - SABINE Power-Q Operating Information Manual

Main Menu pull downs (Figure 69) allow selection of all POWER-Q functions via click and
release. "Cascade" allows function screens to be displayed without completely covering previous screen
displays.
SELECT pull down menu displays each POWER-Q in the serial network. Click
and release to connect controls on the main screen to your chosen POWER-Q
in the network you are currently controlling.
This is identical to clicking on your chosen POWER-Q in the upper left corner of
the main screen.
The Options menu (Figure 70) allows access to both the Copy Devices and the
Reference Name Edit screens as shown below. The screens these two options
reveal are shown in detail on the following page.
The Reference Name Edit screen below (Figure 71) allows you to customize your remote POWER-Q
network by assigning names (e.g., "MAINS" or "MONITORS") or IDs (besides the default POWER-Q
serial numbers) to each POWER-Q in the network.
Simply click in the field below each POWER-Q icon displayed on the screen, and type in your chosen
name for each unit. Each name or ID may have up to 8 characters.
The Copy Device screen at right (Figure 72) allows instant param-
eter copying from a source POWER-Q to any or all of the other
POWER-Qs in the network. The currently selected POWER-Q
(chosen by highlighting the unit in the Main Screen) is displayed in
the left hand "Copy From" column, and all other POWER-Qs in the
network are shown in the right hand "Copy To" column. Simply
click on any POWER-Qs in the right column that you wish to have
copy some or all of the parameter values set in your selected
(source) POWER-Q. A single click "arms" the copy function for
each chosen POWER-Q destination, as indicated by a solid line
and arrow connecting the source and each selected POWER-Q; a
second click disarms copy and removes the connecting line.
"Select All Stations" will arm the copy function for all POWER-Qs in
the "Copy To" column.
Clicking any or all POWER-Qs in the right hand column prepares
the copy network.