Front & Back Panel Views & Controls - SABINE Power-Q Operating Information Manual

MIDI: MIDI data
SERIAL: RS232 serial port data
DIGITAL: AES/EBU digital interface
as of this publication, MIDI control of the POWER-Q is not yet implemented.
CLIP: CLIP LEVEL indicator lights when the input
level is 3 dB below clipping level.
LIMIT: Indicates signal above limit or compressor
threshold.
SIGNAL: Lights when signal level is above -30 dBV
peak.
GATE: Indicates signal below gate or expander
threshold.
(for multiple POWER-Qs)
CURVE
TURB -
(When HELP screen is activated, "HELP" will
appear in lower right of display window. To escape
HELP screen, press HELP button again.)
(Differing ground potentials between or among interconnected
equipment racks may introduce hum or noise into the sound
system. The POWER-Q ground lift switch isolates the AC
ground from the chassis when in the extended position.)
The POWER-Q will
automatically pass
signal through a
hard wire bypass
when the unit is
switched off.