Load Options Screen; Name A Configuration - SABINE Power-Q Operating Information Manual

NAME A CONFIGURATION: Use the up/down arrow keys to select the parameters you wish to
save (all parameters, Program Curve only, all parameters except the Program Curve). Press the
"ENTER" button to save your selection. The POWER-Q will automatically return you to the
"STORED CONFIGURATIONS" window, with the first character in the name of the new memory
highlighted (the default name is "PROG"). Use the data wheel and the left/right arrow keys to
write a new name for the memory location.
To LOAD a configuration (see the screen below), use the up/down arrow keys to select the desired
curve. Press the "LOAD" soft key. You will be given a choice of parameters to load (all, Program
Shaping Curve only, or all parameters except Program Shaping Curve), assuming you saved all
the parameters when you originally created the memory. Otherwise your load options will be
limited to the parameters you saved. Hit "ENTER" to load your selection.
Note that loading new parameters (with or without the Program Curve) will briefly mute audio that
is playing through the POWER-Q when "LOAD" is executed. This will prevent popping if digital
delay settings change with the loading.
Any memory (except the system default) may be cleared by pressing the "CLEAR" soft key. There
is a built in fail-safe option to make sure you want to clear your memory.
The left margin of the "STORED CONFIGURATIONS" window will indicate the most recent
memory loaded and saved.
Note that when the POWER-Q is turned off, or if the electrical service is interrupted, the unit
will return to all its most recent settings upon power-up.