Power-Q Remote Main Screen; Main Rta Screen - SABINE Power-Q Operating Information Manual

Once you've identified all POWER-Qs in your serial network and successfully launched the program,
the screen below will appear. The "default" function screen is the Real-Time Analyzer & EQ screen.
The icons across the top of the screen represent the functions of the Power-Q. These functions
can be selected by one of three methods: a mouse click on the icon, click and release pull down
from the Main Menu or by pressing the Function keys of your computer keyboard. (As indicated
in the pull down menu, "F1" and "F10" are not control keys.)
Automatic
F2
Room EQ
FBX/Parametric
F3
High & Low Pass
Filters
Freq
F4
Response
Curve
Graphic
F5
EQ/RTA
Compressor/
F6
Limiter
All other functions may be se-
lected using 'pull-down' menus,
icons or function buttons (see
below). All remote adjustments
are identical to the operation of
the POWER-Q through its front
panel controls.
NOTE ON RTA DISPLAY:
Because of the speed of serial com-
munication, the RTA display for the
Sabine remote software will not re-
spond as quickly as the front panel
display on the POWER-Q unit itself.
Stored
Configurations
Digital
F8
Delay
Noise Gate/
F7
Expander
Buttons appear only
when function is engaged.
Front Panel
F12
LEDs
Global F11
Parameters
F9