Table of Contents
Advertisement
Connecting the CalDigit AV Drive (USB3.0 Interface)
1
Please make sure you have a USB 3.0 interface on the computer.
2
If you need to install the CalDigit SuperSpeed PCI Express Card, please make sure the
computer is turned off. Unplug the power cord and wait 5 to 10 minutes allowing the
computer's internal components to cool.
3
Open up the computer. If you are using a MacPro, please hold the side access panel and lift
the latch on the back of the computer. Remove the access panel. If you are using a PC, please
make sure there is an available PCIe slot and remove any necessary screws.
10
Power Cord Socket
Power Cord Plug
Advertisement
Table of Contents
Need help?
Do you have a question about the AV Drive and is the answer not in the manual?