Table of Contents
Advertisement
SETTING THE CLOCK
1
With the power off, press the
PROGRAM/CLOCK SET button;
1
the hours will blink.
4
2
1
Press the Tune/Skip/Search n 1
or o 2 button to set the current
minute.
PRESET EQ
1
With the power on, press the
PRESET EQ button to cycle
through the preset EQ settings or
1
to turn the EQ off. Each press of
the EQ button will cycle as
follows: CLASSIC, ROCK, POP
or FLAT.
OPERATING INSTRUCTIONS
2
2
1
Press the Tune/Skip/Search n 1
or o 2 button to set the current
hour. Be sure to observe the AM or
PM indicators to make sure you
have set the hour correctly.
5
Press the PROGRAM/CLOCK
SET button and the time will be
set.
MUTE
1
To temporarily mute the sound,
press the MUTE button on the
remote control; the sound will be
muted. Press the MUTE button
again to restore the sound.
2
3
Press the PROGRAM/CLOCK
SET button; the minutes will blink.
BACKLIGHT
While the unit is In the Standby
mode, the backlight will light
dimly. While the unit is on, the
backlight will light brightly.
1
HEADPHONE JACK
1
To listen to the unit through
headphones, simply insert the
headphones (not included) into
the
speakers will be disconnected
when the headphones are
plugged in.
8
1
1
Headphone
jack.
The
Advertisement
Table of Contents
