Transferring A Call - Chevrolet 2011 HHR Owner's Manual

Transferring a Call

Audio can be transferred between the Bluetooth system
and the cell phone.
The cell phone must be paired and connected with the
Bluetooth system before a call can be transferred. The
connection process can take up to two minutes after the
ignition is turned to ON/RUN.
To Transfer Audio From the Bluetooth
System to a Cell Phone
During a call with the audio in the vehicle:
g
1. Press .
2. Say Transfer Call .
To Transfer Audio to the Bluetooth System
From a Cell Phone
During a call with the audio on the cell phone,
g
press . The audio transfers to the vehicle. If the
audio does not transfer to the vehicle, use the audio
transfer feature on the cell phone. See your cell phone
manufacturers user guide for more information.
4-80
Voice Pass-Thru
Voice pass thru allows access to the voice recognition
commands on the cell phone. See your cell phone
manufacturers user guide to see if the cell phone
supports this feature.
To access contacts stored in the cell phone:
1. Press and hold
2. Say Bluetooth . The system responds Bluetooth
ready , followed by a tone.
3. Say Voice . The system responds OK, accessing
<phone name> .
The cell phone's normal prompt messages will
go through its cycle according to the phone's
operating instructions.
Dual Tone Multi-Frequency (DTMF)
Tones
The Bluetooth system can send numbers and the
numbers stored as name tags during a call. You can
use this feature when calling a menu driven phone
system. Account numbers can also be stored for use.
I n f o r ma t i o n P r o v i d e d b y :
g
for two seconds.