Table of Contents
Advertisement
USB Support [Partial In...]
[Disabled]
[Full Initial]
[Partial Initial]
PS2 Devices Support [Enabled]
This item allows you to set the PS/2 devices support. Coniguration options: [Auto] [Enabled].
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
3.7.4
Post Logo Delay Time [3 sec]
Allows you to set the Post Logo Delay Time. Coniguration options: [0 sec] [1 sec] ~ [10 sec].
3.7.5
Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Coniguration options: [Disabled] [Enabled]
3.7.6
DirectKey Enable [Go to BIOS...]
[Disabled]
[Go to BIOS Setup]
3.7.7
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
3.7.8
Next boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
3.7.9
CSM Parameters
This option allows you to control the CSM launch parmeters.
Launch CSM [Enabled]
Coniguration option: [Auto] [Enabled] [Disabled]
The following four items appear when Launch CSM is set to [Enabled].
Boot option filter [UEFI and L...]
Coniguration option: [UEFI and Legacy] [Legacy only] [UEFI only]
3-24
All the USB devices will be available only afater entering the operating
system (OS).
All the USB devices will be available during POST and in OS.
Speciic USB device / port will be available before entering OS.
Disables network stack driver support during POST.
Enables network stack driver support during POST.
Disables the DirectKey function.
Allows the system to power on and go to BIOS setup directly
when you press the DirectKey button.
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Returns to normal boot up process after AC Power Loss.
Accelerates the boot up speed after AC Power Loss.
Chapter 3: BIOS setup
- Quick Links:
- Motherboard Layout
- System Memory
Hide quick links:
Advertisement
Table of Contents
