Post Delay Time [3 Sec]; Bootup Numlock State [On]; Wait For 'F1' If Error [Enabled]; Option Rom Messages [Force Bios] - Asus Z77-A User Manual

2.7.3

Post Delay Time [3 sec]

Allows you to set the POST Report wait time. This configuration only functions in Normal
Boot mode. Configuration options: [0 sec] [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec]
[8 sec] [9 sec] [10 sec]
2.7.4

Bootup NumLock State [On]

[On]
[Off]
2.7.5

Wait for 'F1' If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.7.6

Option ROM Messages [Force BIOS]

[Force BIOS]
[Keep Current]
2.7.7

Interrupt 19 Capture [Postponed]

[Immediate]
[Postponed]
2.7.8

Setup Mode [EZ Mode]

[Advanced Mode]
[EZ Mode]
2.7.9

CSM (Compatibility Support Module)

This option controls whether or not CSM (Compatibility Support Module) will be launched.
Launch CSM [Auto]
Configuration option: [Auto] [Enabled] [Disabled]
2-36
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Immediately capture Interrupt 19 during boot process.
Postpone capture of Interrupt 19 during boot process.
Sets Advanced Mode as the default screen for entering the BIOS setup
program.
Sets EZ Mode as the default screen for entering the BIOS setup
program.
Chapter 2: BIOS information