Installing Two Crossfirex™ Graphics Cards - Asus F2A85-M PRO User Manual

6.1.3 Installing two CrossFireX™ graphics cards
The following pictures are for reference only. The graphics cards and the motherboard
layout may vary with models, but the installation steps remain the same.
1. Prepare two CrossFireX-ready graphics cards.
2. Insert the two graphics card into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 1 in this user manual
for the locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3. Ensure that the cards are properly
seated on the slots.
4. Align and irmly insert the CrossFireX
bridge connector to the goldingers on
each graphics card. Ensure that the
connector is irmly in place.
6-2
CrossFireX bridge
(bundled with
graphics cards)
Goldingers
Chapter 6: Multiple GPU support