Intended use Do not use the appliance if any part is damaged or defective. Your Black & Decker vacuum cleaner has been designed to Have any damaged or defective parts repaired or replaced vacuum dry substances. This product is intended for household by an authorised repair agent.
Keep your hair, clothing and gloves away from moving Mounting the suction head (fig. E) parts. Do not reach into the rotating brush. Keep the The suction head (9) allows for vacuuming on carpet and hard rotating brush away from the power supply cord. surfaces (e.g.
Release the knob. Carrying the appliance (fig. H) During use the appliance can be carried using the handle (4). Adjusting the suction head (fig. E) Tilt the handle into position as shown. For vacuuming on carpets, switch the floor surface selector (24) into the up position.
Clean the filter as described below. Replacing the container filter (fig. L - N) Re-fit the cover (5), taking care that the hook (34) clicks Proceed as described above to replace the filter (35). back in place. Re-insert the container into the appliance until the clip Replacing the motor filter (fig.
Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. Technical data VL1620 VL1840 VL2000 VL2040 To claim on the guarantee, you will need to submit proof of Voltage V 230 purchase to the seller or an authorised repair agent. You can (Australia &...