Regularly check the charger lead for damage. Replace the charger if the lead is damaged or defective. vacuum cleaner Never attempt to remove or replace any parts other than those specified in this manual.
The appliance/tool/battery must be placed in a well ventilated area when charging. Electrical safety Your charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate. Never attempt to replace the charger unit with a regular mains plug.
Warning! Do not charge the battery at ambient temperatures below 10°C or above 40°C. Note: If your vacuum cleaner is supplied with a single charger with a dual lead to charge both the appliance and the powered brush head (13), the jack plugs are the same size and are interchangeable.
Close the transparent door (7) and make sure that it clicks into place. Warning! Do not, under any circumstances, rinse out the dust container. Warning! Do not immerse the appliance in water. A damp cloth and soapy water should be used to clean the exterior of the appliance.
Technical data PD1200 H2 Voltage Vdc 12 Weight kg 1.8 Charger *A170020D Input voltage Vac 230 Output voltage Vac 17 Output current mA 200 Approx. charging time h 24 Weight kg 0.2 Powered brush head Voltage Vdc 2.4 Brush rotation rpm 2500 Level of sound pressure, measured according to EN 60704-1: = 72 dB(A)
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.