Table of Contents
Advertisement
PROGRAMMED PLAYBACK
The DVD player in this unit has a 16 chapter programmable memory that allows you to
program up to 16 chapters on any disc for playback in any desired order. You may program 16
different chapters or you may also program certain chapters to play more than once. To
perform Programmed Playback, proceed as follows:
1
While in the Stop mode, press the PROG.
button; the Program menu will appear on
the TV screen.
3
Select the next program number using the
Navigation (√,®,π,†) button and repeat
step 2 until all desired chapters have been
programmed (up to 16).
TO CLEAR ALL OF THE PROGRAM:
While in the Stop mode, press the PROG button, then use the Navigation (√,®,π,†) button to select
"CLEAR ALL" at the bottom of the Program menu; then press the ENTER button to clear the program.
NOTE:
•
If the unit is turned off, the disc is changed or the disc compartment door is opened, all the programs
will be cleared.
DVD OPERATION (CONTINUED)
2
1
Select the first title to be played back using
the Number buttons 1 to input two digits.
After inputting the title, press the Navigation
(®) button 2 to advance the cursor to the
chapter.
Then, select the first chapter to be played
back using the Number buttons 1 to input
two digits.
NOTE: If you incorrectly enter a title or
chapter, press the CLEAR button to clear it.
4
1
Use the Navigation (√,®,π,†) button 1 to select
"PLAY PROGRAM" at the bottom of the Program
menu; then press the ENTER button 2 to begin
Programmed playback. Playback will begin on the
first chapter that you programmed and the player
will continue to play all of the chapters that you
programmed in the order in which you programmed
them.
NOTE: To stop Programmed playback, press the
Stop (I) button.
32
2
2
Advertisement
Table of Contents
